3M™ Hi-Strength 94 ET, Cylinder Spray Adhesive
3M™ Hi-Strength 94 ET Cylinder Spray Adhesive is a high-strength, industrial-scale spray adhesive designed for large surface laminations, woodworking, furniture assembly, and other heavy-duty bonding applications where long open time and strong postformable adhesion are needed. Its aggressive tack, extended bonding range (up to ~60 min), and low-VOC certifications make it suited for professional manufacturing environments.
Key Features
High-strength, long open time adhesive: Designed with a more aggressive tack and extended open time (up to ~60 min) compared to standard contact adhesives — allows repositioning and alignment before final bond.
Excellent surface coverage: Higher solids content (~20–25%) yields greater coverage and less adhesive soak-in vs competing adhesives.
Versatile spray application: Can be sprayed, rolled, or brushed onto surfaces to improve control and reduce overspray and waste.
Certified low VOC: CARB (California Air Resources Board) and SCAQMD compliant and GREENGUARD® certified, supporting improved indoor air quality and LEED® credits.
Postformable: Suitable for postforming applications (allowing bending after bonding) in woodworking and other industries
Applications
High-pressure laminate (HPL) countertops, furniture and fixture assembly.
Edge banding and decorative laminate application.
Wood furniture assembly, cabinetry, and millwork.
Specialty vehicle flooring and interiors (marine, RV, transit).
Carpet, rubber, synthetic flooring, and bonded panel systems.
Product Data | |
| Form | Cylinder spray adhesive (liquid delivered by industrial spray system). |
| Color | Clear or red variants available. |
| Open Time | Up to ~60 minutes (longer bonding range). |
| Substrates | Metals, wood, rubber, carpets, laminates, plastics, flooring. |
| Application Methods | Spray, roll, or brush. |
| VOC | <80 g/L (cylinder adhesive versions) |
| Certifications | CARB and SCAQMD compliant; GREENGUARD® certified. |
Safety & Handling
For detailed hazard and handling instructions, always consult the official Safety Data Sheet (SDS) provided by 3M for the specific part number/region you’re using. General guidelines for solvent-based industrial spray adhesives include:
Health Hazards
Contains solvents and organics; vapors may be harmful if inhaled.
Prolonged skin contact can irritate sensitive skin.
In confined or poorly ventilated areas, solvent vapors can accumulate.
Personal Protective Equipment (PPE)
Wear chemical-resistant gloves (e.g., nitrile) when handling adhesive.
Safety goggles or face shield to protect eyes from spray.
Use in a well-ventilated area or local exhaust ventilation to minimize inhalation risk.
Fire & Storage
Solvent-based adhesives are flammable; keep away from sparks, flames, or heat sources.
Store under recommended conditions (cool, dry, away from ignition) and keep container sealed when not in use.
First Aid (Typical)
Skin contact: Wash thoroughly with soap and water; avoid solvents for skin cleaning.
Eye contact: Rinse immediately with plenty of water and seek medical attention if irritation persists.
Inhalation: Move to fresh air; seek medical help if symptoms occur.
Related products
