Cemedine CA-193
Cemedine CA-193is a two-component epoxy adhesive that begins to cure about 30 minutes after mixing and provides strong, durable bonds for hard materials.
Product Description
Product Name: Cemedine CA-193
Type: Two-component epoxy adhesive (base + hardener)
Form: 80 g set (typically 40 g base + 40 g hardener)
Curing: Begins around 30 minutes after mixing at room temperature (~23 °C), with full hardening over time.
Cured Appearance: Transparent/light-colored finish.
Application & Suitable Materials
Cemedine CA-193 bonds a wide variety of hard materials:
Suitable for:
Metals (stainless steel, aluminum, copper, iron, alloys)
Plastics (nylon, PVC, ABS, FRP, styrene, acrylic)
Rubber (natural and synthetic)
Ceramics, stone, tile
Wood and composite materials
Many crafts and hobby materials (models, small assemblies)
Product Data
Property Typical Characteristic
Mix Ratio Approx. 1:1 (base:hardener)
Working Time Begins curing ~30 min at ~23 °C
Cured Strength High bond strength (often >30 MPa reported by sellers)
Cured Appearance Transparent/light color
Package Size ~80 g set
Resistance Good moisture & chemical resistance (typical epoxy trait)
Safety & Handling
General epoxy adhesive precautions apply (similar to other CA-series epoxies):
Mix components thoroughly before application.
Use in well-ventilated areas.
Wear protective gloves and eye protection.
Avoid inhalation of vapors and direct skin contact.
Keep away from heat or open flames.
Once fully cured, epoxy is typically inert.
